Mechanical properties of virgin and recycled polyolefin‐based composite laminates reinforced with jute fabric

Polyolefin‐based composite laminates reinforced with jute fabric were prepared by compression molding and investigated in terms of flexural properties and impact behavior. The use of a virgin polypropylene as the matrix was compared with two polyolefin matrices coming from discarded car bumpers and selected packaging wastes, respectively, and mainly constituted by mixtures of polyethylene and polypropylene resins. The influence of a coupling agent (maleated polypropylene) was always considered in order to improve the interfacial adhesion and, consequently, the composite strength. The effect of this coupling agent, clearly dependent on the amount of polypropylene phase in the overall mixture, was found to be satisfactory only in the case of virgin polypropylene‐based systems. These latter, in presence of maleated polypropylene, have shown higher flexural parameters, lower propagation energy and higher breaking impact load with respect to uncompatibilized ones. Results were supported by morphological observations of impact surfaces, always highlighting a poor adhesion at the reinforcement–matrix interface except in compatibilized virgin polypropylene‐based laminates. POLYM. COMPOS., 36:2022–2029, 2015. © 2014 Society of Plastics Engineer     

Efficient inclusion for a class of XML types with interleaving and counting

Inclusion between XML types is important but expensive, and is much more expensive when unordered types are considered. We prove here that inclusion for XML types with interleaving and counting can be decided in polynomial time in the presence of two important restrictions: no element appears twice in the same content model, and Kleene star is only applied to disjunctions of single elements.     

Investigation on the non‐quasi‐static effect implementation for millimeter‐wave FET models

The present article analyzes in detail different intrinsic small‐signal models for transistors. Particular attention is devoted to the non‐quasi‐static effects, which play a crucial role at microwave and millimeter‐wave frequencies. The advantages and disadvantages of these different equivalent circuit topologies are analyzed from both theoretical and experimental standpoints. This study clearly proves that best choice among these model representations depends on the specific device technology besides the investigated frequency range. © 2009 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

Ultraviolet B (UVB) Irradiation-Induced Apoptosis in Various Cell Lineages in Vitro

Ultraviolet B (UVB) radiation acts as a strong apoptotic trigger in many cell types, in tumor and normal cells. Several studies have demonstrated that UVB-induced cell death occurs through the generation of reactive oxygen species. The consequent oxidative stress includes the impairment of cellular antioxidants, the induction of DNA damage and the occurrence of apoptosis. In this review, we investigated UVB apoptotic action in various cell models by using ultrastructural, molecular and cytofluorimetric techniques. Myeloid leukemia HL-60, T-lymphoblastoid Molt-4 and myelomonocytic U937 human cells, generally affected by apoptotic stimuli, were studied. Human chondrocytes and C2C12 skeletal muscle cells, known to be more resistant to damage, were also considered. All of them, when exposed to UVB radiation, revealed a number of characteristic apoptotic markers. Membrane blebbing, cytoplasm shrinkage and chromatin condensation were detected by means of electron microscopy. DNA cleavage, investigated by using agarose gel electrophoresis and TUNEL reaction, was observed in suspended cells. Differently, in chondrocytes and in skeletal muscle cells, oligonucleosomic DNA fragmentation did not appear, even if a certain TUNEL positivity was detected. These findings demonstrate that UVB radiation appears to be an ideal tool to study the apoptotic behavior.     

Web accessibility guideline aggregation for older users and its validation

Web site-evaluation methodologies and validation engines take the view that all accessibility guidelines must be met to gain compliance. Problems exist in this regard, as contradictions within the rule set may arise, and the type of impairment or its severity is not isolated. The Barrier Walkthrough (BW) method goes someway to addressing these issues, by enabling barrier types derived from guidelines to be applied to different user categories such as motor or visual impairment, etc. However, the problem remains of combinatorial explosion of possibilities when one has to consider users with multiple disabilities. In this paper, a simple set theory operation is used to create a validation scheme for older users by aggregating barrier types specific to motor impaired and low-vision users, thereby creating a new “older users” category from the results of this set union. To evaluate the feasibility and validity of this aggregation approach, two BW experiments were conducted. The first experiment evaluated the aggregated results by focusing on quality attributes and showed that aggregation generates data whose quality is comparable to the original one. However, this first experiment could not test for validity, as the older users category was not included. To remedy this deficiency, another BW experiment was conducted with expert judges who evaluated a web page in the context of older users. In this second experiment, it was found that there is no significant difference between the aggregated and the manually evaluated (by experts) barrier scores, and that the same barriers are identified using experts and aggregation, even though there are differences in how severity scores are distributed. From these results, it is concluded that the aggregation of barriers is a viable alternative to expert evaluation, when the target of that aggregation could not be evaluated manually or it would not be feasible to do so. It is also argued that aggregation is a technique that can be used in combination with other evaluation methods, like user testing or subjective assessments.     

One and the same pathogenetic process for cognitive therapy and experiential dynamic therapy?

Cognitive therapy and experiential dynamic therapy show quite many similarities but they diverge in their initial approach to the patient (aiming respectively at cognitions and at emotions) and in their assumptions about core pathogenetic processes. According to cognitive therapy patients suffer because of a negative unrealistic inner representation of self and world, whereas for experiential dynamic therapy problems arise from conflictual experience and expression of healthy feelings and needs. A synthetic model of the pathogenetic core process, embracing both a conflict about healthy needs and emotions, and a negative self-image, is outlined and discussed. In particular, the model's congruence with new knowledge emerging from infant and attachment research, emotion theory, and cognitive neurosciences is illustrated. Assuming an identity of their basic pathogenetic theory, the two therapies can be thought of as two initially different approaches, the one focusing more on cognitions, the other on emotions, but converging toward the change of a common pathogenetic core. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A GC-EI-MS/MS Method for the Determination of 15 Polybrominated Diphenyl Ethers (PBDEs) in Fish and Shellfish Tissues

This paper describes the development and validation of an analytical method to determine 15 polybrominated diphenyl ethers (PBDEs) in fish and shellfish tissues with gas chromatography coupled to triple quadrupole mass spectrometry using electron impact source (GC-EI-MS/MS). A QuEChERS (Quick, Easy, Cheap, Effective, Rugged, and Safe)-like procedure was applied; the extract was cleaned up on an acidic Extrelut-NT3 column connected on top of a silica cartridge and further purified with gel permeation chromatography (GPC). The SIM acquisition proved to yield better results than traditional MRM approach for octa-, nona-, and deca-brominated congeners. The validation study was carried out in inter-laboratory conditions. The average recoveries were in the range 66–118%, with relative standard deviations generally lower than or equal to 22%. Quality assurance and quality control practices were thoroughly described and highlighted. These long and tedious practices are fundamental to obtain reliable quantitative data during food monitoring programs and, therefore, to support daily intake assessments. Finally, the procedure was applied to the analysis of marine fish samples collected in local markets. Mackerel and mullet were the most contaminated species.     

Design and characterization of a current sensing platform for silicon-based nanopores with integrated tunneling nanoelectrodes

Solid-state nanopores have been gaining popularity in nano-biotechnology for single molecule detection, in particular for label-free high-throughput DNA sequencing. In order to address the improvement of the resolution/speed trade-off critical in this application, here we present a new two-channel current amplifier tailored for solid-state nanopore devices with integrated tunneling electrodes. The simultaneous detection of ion and tunneling currents provides enhanced molecule tracking capability. We describe the system design starting from a detailed noise analysis and device modeling, highlighting the detrimental role of the conductive silicon substrate and of all the stray capacitive couplings between the electrodes. Given the high input capacitance (0.1–1 nF), the input voltage noise has been carefully minimized choosing a discrete couple of matched low-noise JFETs as input stage, thus achieving an equivalent input noise of 1.5 nV/√Hz (corresponding to a current noise floor of 15 fA/√Hz at 10 kHz). Low-noise performance (11 pA rms noise integrated over a 75 kHz bandwidth) is preserved at a wide bandwidth (300 kHz) and high gain (100 MΩ) thanks to the adoption of an improved integrator/differentiator cascade topology. Furthermore, along with biasing networks and selectable low-pass filters, an AC-coupled channel providing additional gain has been introduced in order to “zoom” in the current signature during pore blockade events. Together with an experimental characterization of the system (and comparison with the noise performance of other instruments), the platform is validated by demonstrating the detection of λ-DNA with 20 nm pores.